Kangu bike wash station 18.004.4
Street Furniture with style.
          |
Downloads
DWG filesbrochureproduct card
We will make Kangu with your logo
We make Kangu with any inscription cut in the construction. As shown in the above projects, we are able to put a company logo or a short inscription. In the case of such an order, it is enough to attach to the e-mail an editable file in curves (.eps, .ai, .pdf, .dwg).
Variants and other models of the Kangu series
There are eight products in our Kangu range. These include four bike repair stations in different configurations, two bike wash and repair stations, a bike pump and a bike stand.
Safety zone - mounting of the station to the ground
When installing the repair station, it is important to take into account the space required for proper operation from the station. The space differs depending on whether the station has an additional bike rack at the rear of the station. The first picture shows a station without a rack, the second picture shows a station with a rack.
Kangu stationwithout additional bicycle rack
Kangu stationwith bicycle rack
Examples of how to use Kangu station
The bicycle repair stations below show how to hold a bicycle during repair. The basic variant are holders on the top of the station made of stainless steel. Optionally, the station may be equipped with a bicycle stand at the rear of the station. The carbon steel station can be painted in any RAL colour specified by the customer. The name cut into the station can also be customised. The name "Kangu" can be replaced by any graphic, logo or inscription.
Model description
The structure is welded and bolted from 5mm, 3mm, 1.5mm thick stainless steel sheets 1.4301 ground. At the top of the station there is a bicycle rack - two stainless steel tubes with a section of 4.2 x 2.6 cm and a length of 45 cm. At the rear of the station there is a bicycle stand made of stainless steel rods with a diameter of 14 mm. All brush fittings (cables) that are part of the station are made of stainless steel. In the basic version, the station is equipped with a set of brushes and tools for washing the bicycle and a timer button, which activates water when pressed. In addition, the station can be equipped with a timer tap for filling water bottles.
Modern line
Modern line presents top quality products made of stainless steel and carbon steel. They were designed especially for the modern architecture. What makes them different is that subtle aesthetics based on simple solid, without any unnecessary ornaments.
Our bicycle racks
We produce our bicycle racks to guarantee secure and comfortable exploitation. In our offer you will find serial bicycle racks or free standing bicycle racks. Bicycle racks are a great protection for every bike. Thanks to the special design and stable mounts our bicycle stands are most secure against theft and vandalism.
Producer
As a leading manufacturer in Poland we always do our best to meet the customer’s requirements. ZANO is equally comfortable and experienced designing for different types of street furniture projects. We are passionate about creating beautiful, functional, sustainable models. This is achieved through a process of focused listening that seeks to truly understand and respond to the inherent nuances of each particular client.
